IoT Kits
In StockF450 Quadcopter Frame Kit
DRN-F450-KIT · Stock: 35
☆☆☆☆☆
No reviews yet — be the first
₹49.99
₹69.99
incl. GST
[Arduino] [ESP32]
Complete F450 quadcopter build kit: glass-fiber PCB center plate, 4× 2212 920KV brushless motors, 4× 30A ESCs, 1045 propellers, and landing gear. Pair with your flight controller of choice.
3 clicks: Buy Now → Checkout → Place Order
450mm carbon-fiber frame + motors + ESCs starter kit
High-res visual shown left · QA bench-tested before dispatch.
| Frame Size | 450mm |
|---|---|
| Material | Glass fiber / PA66 |
| Motors | 2212 920KV × 4 |
| ESCs | 30A SimonK × 4 |
| Props | 1045 CW/CCW |
| AUW Capacity | ~1200g |
| Dimensions | 450 × 450 × 55 mm |
| Weight | 280g (frame) |
ESC Signal
PWM
Battery
XT60 3S/4S
FC UART
Telemetry
I2C
Sensors
Wiring guide: power rails first (VCC/GND), then bus (I2C/SPI), then interrupt/PWM lines.
// Basic ESC arming sketch (safety first!)
#include <Servo.h>
Servo esc;
void setup() {
esc.attach(9);
esc.writeMicroseconds(1000); // throttle low
delay(3000); // arm
}
void loop() {
// Hold idle — do NOT spin props indoors
esc.writeMicroseconds(1000);
}
# Drone telemetry stub (MicroPython on FC companion)
import time
def read_battery():
return 12.4 # simulated
while True:
v = read_battery()
print(f'Battery: {v:.1f}V')
time.sleep(1)
// Basic ESC arming sketch (safety first!)
#include <Servo.h>
Servo esc;
void setup() {
esc.attach(9);
esc.writeMicroseconds(1000); // throttle low
delay(3000); // arm
}
void loop() {
// Hold idle — do NOT spin props indoors
esc.writeMicroseconds(1000);
}
Technical datasheet for DRN-F450-KIT.
Community signal
Ratings & Reviews
Real maker feedback for F450 Quadcopter Frame Kit.
—
No reviews yet — be the first
No public reviews yet
Share a wiring tip, build note, or bench-test result to help the next maker.